Z1 Motorsports Front Bash Bar Installation

60 minutes

3 tools

6 steps

Replaces the OEM crash bar with a lighter, stronger aftermarket bar designed for added front-end rigidity and better airflow to coolers.

Raise vehicle safely. Remove bumper, undertray, and fender liners.

Unbolt eight mounting bolts; retain OEM hardware if reusing.

Align with frame rails; hand-tighten bolts first, then torque to spec.

Refit bumper and verify clearance for intercooler/heat exchanger.

Recommended to recheck torque after 50 miles; visually inspect alignment with bumper cover.

0.0 (0 ratings)

Loading comments...

Loading nearby installers...